SMART M600i6 User Manual

APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
56 smarttech.com/kb/170549
Field definitions
Field Possible values Description
off option now This is an optional field. It forces the projector
to shut down. Once this process starts, you
can’t cancel it. If “now” isn’t specified, the “off”
command causes a countdown to appear. To
turn off the projector, you must send a second
“off” command before the countdown expires;
otherwise the projector, remains on at the end
of the countdown.
NOTE
Consider this as another projector state.
When the countdown is complete, an
asynchronous response indicates that the
projector has returned to the “on” state.
When the projector has turned off, this
command should be accepted but doesn’t do
anything but return the power state.
powerstate
l
powering
l
on
l
cooling
l
confirm off
l
idle
The projector’s current power state. Different
projectors have different potential power
states. These power states match the power
states in the SMART UF70 and SMART UF70w
projectosr.
Source Application Selection
Use these commands to switch between input sources and embedded applications. These
commands also control the USB switch for these sources.
Command/response definitions
Command Response Responds when powered off
set input [target] input=[current] no
get input input=[current] yes
get videoinputs videoinputs=[current] yes
set usb1source [target] usb1source=[current] yes
get usb1source usb1source=[current] yes
set usb2source [target] usb2source=[current] yes
get usb2source usb2source=[current] yes

SMART M600i6 Specifications

General

Brand	SMART
Model	M600i6
Category	Interactive whiteboard
Language	English