SMART MX Series - Page 29

CHAPTER2
INSTALLING THE DISPLAY
17 smarttech.com/kb/171257
l Use the included wall mount. Optionally, use a VESA-approved mounting plate that is rated for
the display’s weight and size.
l If you’re not using the included bolts to fasten the wall mount to the display, see the following
table.
SMARTBoard
MX265
Minimum
M6
length
14 mm + x mm
where x is the combined thickness of the wall
mount and washer
Maximum
M6 bolt
length
18 mm + x mm
where x is the combined thickness of the wall
mount and washer
Fasten
force
97.36–177.01 in-lb. (11–20 N·m)
CAUTION
Do not over-tighten the bolts.
SMARTBoard
MX275
Minimum
M8
length
18 mm + x mm
where x is the combined thickness of the wall
mount and washer
Maximum
M8 bolt
length
30 mm + x mm
where x is the combined thickness of the wall
bracket and washer
Fasten
force
97.36–177.01 in-lb. (11–20 N·m)
CAUTION
Do not over-tighten the bolts.
SMARTBoard
MX286
Minimum
M8
length
14 mm + x mm
where x is the combined thickness of the wall
mount and washer
Maximum
M8 bolt
length
30 mm + x mm
where x is the combined thickness of the wall
mount and washer
Fasten
force
97.36–177.01 in-lb. (11–20 N·m)
CAUTION
Do not over-tighten the bolts.