Smitec Cosmos 3152FA - Dynamic Brake Output Connector (BRAKE R;J2)

COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
5.3.5 Dynamic brake output (BRAKE R/J2)
The dynamic brake output is arranged for the connection of a power resistor necessary for the dissipation of the power
produced by the braking motors.
In the driver models equipped with dynamic brake it is essential that the internal resistance or an
external one is connected to this output.
Connector type: Phoenix Contact GFKC 2,5/ 3-ST-7,62PA1,3BDR SO (TBD) * **
Order code: KF101043
Features Connector cross section
Connection in accordance
with
EN-VDE Solid min. 0,2mm²
Rated voltage 900V Solid max. 2,5mm²
Rated current 12A Stranded min. 0,2mm²
Stranded max. 2,5mm²
Insulating material PA Stranded ferrule without plastic sleeve, min. 0,25mm²
Flammability rating
(Standard UL 94)
V0 Stranded ferrule without plastic sleeve max. 2,5mm²
Stripping length 8mm Stranded ferrule with plastic sleeve min. 0,25mm²
Screwdriver to be used in
order to open the
connections
0,6 x
3,5mm
Stranded ferrule with plastic sleeve max. 2,5mm²
*= Use 60/75 °C wires only (UL)
**= Use Copper Conductors only (UL)
Connector BRAKE R/ J2
Label Signal
R Resistor
R Resistor
Ver. 1.07 Pag. 38