Smitec Cosmos 3152FA - VISIO Menu; Models for Brushless Motor; Models for Asynchronous Motor; Sercos II Cosmos

COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
7.2.16 VISIO menu
7.2.16.1 Models for brushless motor
Menu Entry Lev. Description
1.13
>VISIO
- This section includes the operation options of the
VISIO 3000.
1.13.1
ALWAYS LIGHT ON
1 It sets the LCD lighting always on or with the
possibility to switch off by means of a timer. By
setting “No”, the light will switch off after some
minutes of inactivity.
Options: No, Yes
1.13.2
RESET DISPLAY
1 It sets the return to the status display, by means of a
timer. By setting “Yes”, the driver status will be
displayed after 5 minutes of inactivity.
Options: No, Yes
7.2.16.2 Models for asynchronous motor
Menu
Entry Lev
.
Description
1.13
>VISIO
- This section includes the operation options of the
VISIO 3000.
1.13.1
LANGUAGE
2 It sets the language of the messages.
Options:
English, Italian.
1.13.2
ALWAYS LIGHT ON
1 It sets the LCD lighting always on or with the
possibility to switch off by means of a timer. By
setting “No”, the light will switch off after some
minutes of inactivity.
Options: No, Yes
7.2.16.3 Sercos II Cosmos
Menu Entry Lev. Description
1.13
>VISIO
- This section includes the operating options of the
VISIO 3000.
1.13.1
ALWAYS LIGHT ON
1 It sets the LCD lighting always on or with the
possibility to switch off by means of a timer. By
setting “No”, the light will switch off after some
minutes of inactivity.
Options: No, Yes.
1.13.2
RESET DISPLAY
1 It sets the return to the status display, by means of
a timer. By setting “Yes”, the driver status will be
displayed after 5 minutes of inactivity.
Options: No, Yes.
1.13.3
LANGUAGE
2 It sets the language of the messages.
Options:
English, Italian.
Ver. 1.07 Pag. 85