Smitec Cosmos 3152FA - Encoder 1 Input (E1) - Type 3502

COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
5.3.6.2.3 Differential Encoder 5V connections (only Type 3502)
Connector E1
Label Signal
1 NTC
2 NTC
3 +5Vdc
4 GND
5 Shield
6 Phase A+
7 Phase B+
8 Hall U+ (#1)
9 Hall V+ (#1)
10 Hall W+ (#1)
11 Phase A-
12 Phase B-
13 Signal Z+
14 Signal Z-
15
SHELL Shield
(#1) The circuitry in these models is designed for non balanced signals; therefore it is possible to only connect positive
poles (U+, V+, W+).
Ver. 1.07 Pag. 41