Programming the Pump
19
Setup
e Setup menu is where you perform certain setup
functions, such as determining which delivery types
should be available, setting the time and date, setting a
new patient marker, setting pump security, setting up
how the pump alarms for certain features and program-
ming the local formats.
Warning: e time and date must be set correctly,
since delivery factors are time-based, and all his-
tory is stored based on time and date. Occasionally
you will need to reset the time, for example, during
daylight savings time or to adjust for a dierent time
zone.
e Setup menu looks dierent depending on whether
the pump is running or stopped. Any menu items asso-
ciated with delivery will only appear in the menu when
the pump is stopped.
At the home screen, press Menu. Press
to choose
Setup, then press Select.
If security is set to Yes for the Setup menu, you will need
to enter a pass code. is is to prevent the patient from
having complete access to all pump programming.
Warning: Do not allow the patient to learn the pass
code. e pass code allows access to all delivery pro-
gramming and security settings.
Once inside the menu, you can choose between the vari-
ous items. Once you have entered a menu item, you can
either make a change to an item (use the
and
keys
until the setting you want is displayed, then press Next),
or press Next to accept the displayed value.
To Next Page
Loading...
Need help?
General
