Using the Pump
31
Loading a cartridge
e Load feature in the pump menu takes you through
each step needed to load a lled cartridge in the pump
and start delivering medication.
Warning: Always use the pump’s Load feature when
starting a new cartridge. is will assure that the
cartridge is properly loaded and the infusion or ex-
tension set is lled with medication.
Warning: Always use aseptic technique, particu-
larly when working with the cartridge, infusion set,
catheter and access site.
Warning: e CADD-MS
™
3 pump and cartridge
are not a secure system. Patient must be assessed for
appropriateness of pump usage.
Supplies required
In addition to the pump, you will need:
• One lled Smiths Medical 3 ml Medication Cartridge
• One infusion or extension set with standard female
luer connection (for connecting to cartridge)
Warning: Always read the Instructions For Use
provided with the medication, cartridge, infusion set,
and any other accessory used with the CADD-MS
™
3
Ambulatory Infusion Pump.
1. Filling the cartridge
Use aseptic technique.
Fill the cartridge according to the Instructions for Use
supplied with the cartridge.
To Next Page
Loading...
Need help?
General
