Using the Pump
36
3. Fill the tubing
Filling forces medication from the cartridge and pushes
air out of the tubing. Filling is complete when you see
medication come out of the end of the tubing and all
air is removed. e amount of medication used to ll
the tubing is not counted as medication delivered to the
patient.
Warning: Never use Fill Tubing when the infusion
set is connected to the body, or an unintended dose
could be delivered.
Press Select
<Back Start
0
Fill
Tubing
ml
<Done Stop
0.09
Filling
Tubing
ml
Press Start
<Back Start
0.25
Fill
Tubing
ml
Tubing begins to ll. When tubing is lled,
press Stop or Done (lling automatically
stops at 0.3 ml)
Press Back
<Back Select>
Continue to ll
tubing?
No
Choose Yes to continue
lling then press Select
NOTE: once the (√) symbol
appears next to Fill tubing,
you will not be able to re-enter
that step unless you rst press
Done to return to the Main
Menu, then re-enter the Load
menu
- OR - Press Start
again to continue
lling
- OR - With No displayed press
Select if you do not want to
continue lling
<Done Select>
Load
Fill Tubing
Fill Cannula
Reminder
Cartridge
Menu
<Done Select>
Load
Fill Tubing
Fill Cannula
Reminder
Cartridge
Menu
To Next Page
Loading...
Need help?
General
