socomec ISOM Digiware - Device Configuration via Easy Config

58 EN
ISOM DIGIWARE - 546780C - SOCOMEC
For each setting selected (1) a customised screen appears, depending on the connected device (2).
10.1.2.1. Conguring the device
ISOM L-60: Conguring L-60 output in positive safety
This screen shows all the key details about the device (read-only). You can also make communication settings
(address, baudrate, parity). Add a synchronisation time and date by pressing the relevant button.
ISOM F-60
This screen shows all the key details about the device (read-only). Only the address can be edited here (make
communication settings on the L-60)