19
NETWORK & INTERNET
NETWORK & INTERNET
WI-FI
Wi-Fi is a wireless network technology that can provide
Internet access at distance up to 100 feet, depending on
the Wi-Fi router and surroundings.
You can access the Internet when you connect your XP8
to a Wi-Fi network. To connect your phone to a Wi-Fi
network;
1. From Notications or Apps menu, tap on Settings
( ) > Network & Internet ( ).
2. Tap on Wi-Fi ( ).
3. Set the Wi-Fi to ON position located under
Network & Internet.
A list of Wi-Fi access points present within your
phone’s accessible range are displayed.
4. Select your preferred network. Enter the WEP/
WPS/WPA key (if it is a secured network) and
select CONNECT. To verify the password before
connecting, enable Show password.
It is always recommended to make your
Wi-Fi network connection secure and also to
connect your phone to a secure network.
ADD NETWORK
1. On Wi-Fi screen, tap on Add network ( ).
2. Enter the Network name and select the Security
from the drop-down list. You can set the network
password.
3. Tap on Advanced options. The settings such as
Proxy and IP settings can be updated using the
drop-down list.
4. Tap on SAVE to save the network settings.
CONNECT TO NETWORK
1. Long tap on any of the listed Wi-Fi access points
displayed in your device.
2. Tap on Connect to network.
3. Enter the network password.
4. The other network setting details such as
Advanced options, Proxy, IP settings can be
updated.
5. Tap on CONNECT to get connected to the
network.
FORGET NETWORK
1. Tap and hold the connected network.
2. Select Forget network.
The selected network gets disconnected and
displayed in the Wi-Fi list.
If you have to get connected to the same network,
enter the password and tap on CONNECT.
MODIFY NETWORK
1. Long press on connected network.
2. Tap on Modify network. You can change the
network password. The other network setting
details such as Advanced options, Proxy, IP
settings can be updated.
3. Select SAVE to save the changes.
WRITE TO NFC TAG
1. Long press on connected network.
2. Tap on Write to NFC tag.
You can set up an NFC tag with your Wi-Fi
information including password.
WI-FI PREFERENCES
• Open network notication: Enable this option to
get a notication when a high-quality public network
is available.
• Advanced: The following options are displayed:
• Install certicates: You can browse a certicate
for installation.
• Network rating provider: This option provides
information about the quality of open Wi-Fi
networks. By default, Google is selected.
• Wi-Fi Direct: Select Option key > Searching
to search for the peer devices and also select
Rename device to rename the device
• WPS Push Button: Press the WPS Push Button
in your router, when prompted.
• WPS Pin Entry: Enter the given PIN number on
your Wi-Fi router.
• MAC address: A MAC (Media Access Control)
address is displayed.
• IP address: IP (Internet Protocol) address is
displayed.
SAVED NETWORKS
Wi-Fi networks which are saved in your device are listed
under Saved networks.
You can also add a network by tapping on Add network
( ) icon.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
