22
CONNECTED DEVICES
CONNECTED DEVICES
BLUETOOTH
Bluetooth is a short-range wireless communication
technology used to communicate between the devices
over a distance of about 8 meters.
• You can perform the following tasks using Bluetooth
paired devices.
• Transfer media les and contacts between
connected mobile devices using Bluetooth.
• Use Bluetooth connected headphones for playing
media le.
• Bluetooth headset can be used during call.
PAIRING A BLUETOOTH DEVICE
To activate Bluetooth and pair your XP8 device with other
Bluetooth devices:
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ).
2. Tap and enable Bluetooth ( ).
3. Tap on Pair new device ( ) to pair a new
device. Available devices are listed. Ensure that
Bluetooth is activated on the other device as well.
4. Select the desired device from the list. It starts
pairing with the selected device. A conrmation
message is displayed to pair the device. Select
PAIR.
DEVICE NAME
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ).
2. Tap and enable Bluetooth ( ).
3. Tap on Device name. Rename this device
screen is displayed. You can change the name
and tap on RENAME.
RECEIVED FILES
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ).
2. Tap and enable Bluetooth ( ).
3. Tap on Received les.
Bluetooth received transfer history is displayed.
CAST
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ).
2. Tap on Cast ( ).
3. You can cast your screen from your Android
device. Connect your Android device to the same
Wi-Fi network as your Chromecast or TV with
Chromecast built-in.
4. Ensure that your Android device and Chromecast
are connected to the same Wi-Fi network.
5. Tap on Options ( ) > check Enable wireless
display to view a list of nearby devices you can
cast to.
NFC
NFC (Near-Field Communication) is a set of
communication protocols that enable two electronic
devices one of which is usually a portable device such as
a smart phone, to establish communication by bringing
them within 4 cm of each other.
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ) > NFC ( ).
2. Turn ON NFC to allow data exchange when your
device touches another device.
ANDROID BEAM
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ) > Android Beam
( ).
2. Android beam is active only when NFC is enabled.
3. Turn ON Android Beam. You can beam an app
content to another NFC capable device by holding
the devices close together.
PRINTING
1. From Notications or App menu, tap on Settings
( ) > Connected devices ( ) > Printing ( ).
2. Under Print services > Default Print Service
( ). Turn ON the Default Print Service.
3. Tap on Add service ( ). Google Play screen
is displayed. You can sign in with your Google
credentials and add any desired service.
USB
USB is a plug-and-play interface that allows a computer
to communicate with peripheral and other devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
