9
HAZARDOUS LOCATION USAGE WARNING
BATTERY SAFETY WARNING FOR IEEE1725
Do not disassemble or open, crush, bend or
deform, puncture or shred.
Do not modify or remanufacture, attempt to
insert foreign objects into the battery, immerse or
expose to water or other liquids, expose to re,
explosion or other hazard.
Only use the battery in the system for which it is
specied.
Only use the battery with a charging system
that has been qualied by the system per CTIA
Certication Requirements for Battery System
Compliant to IEEE 1725. Use of an unqualied
battery or charger may present a risk of re,
explosion, leakage or other hazard.
Do not short circuit a battery or allow metallic
conductive objects to contact battery terminals.
Promptly dispose of used batteries in
accordance with local regulations.
Replace the battery only with another battery
that has been qualied with the system per this
standard, IEEE-Std-1725. Use of an unqualied
battery may present a risk of re, explosion,
leakage or other hazard. Only authorized service
providers shall replace battery. (If the battery is
non-user replaceable).
Battery usage by children should be supervised.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a hard
surface, and the user suspects damage, take it
to a service center for inspection.
Improper battery use may result in a re,
explosion or other hazard.
CHARGING SAFETY WARNING
The equipment shall only be charged when in the
non-hazardous area using a charger specically
supplied for use with the unit USB cable and
AC charger S42A02(US plug)/ S42A00(EU plug)/
S42A01(UK plug).
DC5 V/2A pin recommend to use charger with
SELV function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
