162 Chapter 7: Troubleshooting and Maintenance
Troubleshooting
No OB measurement
selections.
Select the OB exam type.
Print does not work. Set the correct printer in system setup.
Check the printer connections.
Check the printer to ensure that it is turned on and set up
properly. See the printer manufacturer’s instructions, if
necessary.
VCR does not record. Check the VCR connections.
Check the VCR to ensure that it is turned on and set up
properly. See the VCR manufacturers’ instructions, if necessary.
External monitor does not
work.
Check the monitor connections.
Check the monitor to ensure that it is turned on and set up
properly. See the monitor manufacturers’ instructions, if
necessary.
Unexpected labels using the
function keys.
Ensure labels have been assigned to the function keys.
Inaccurate fetal age
calculation.
Ensure that the patient information, date, and time are set
accurately.
System does not recognize the
transducer.
Disconnect and reconnect the transducer.
Text cursor does not move
when touchpad or arrows are
selected.
Text cursor is constrained to one line.
A maintenance icon
displays on the system screen.
This icon indicates that system maintenance may be required.
Record the number in parentheses on the C: line and contact
SonoSite or your SonoSite representative.
Table 1: Troubleshooting (Continued)
Symptom Solution
To Next Page
Loading...
