176 Chapter 7: Troubleshooting and Maintenance
Troubleshooting
Cleaning and Disinfecting the Battery
To clean and disinfect the battery using the wipe method:
1 Remove the battery from the system.
2 Clean the surface using a soft cloth lightly dampened in a mild soap or detergent cleaning
solution.
Apply the solution to the cloth rather than the surface.
3 Wipe the surfaces with the disinfection solution. Theracide disinfectant is recommended.
4 Air dry or towel dry with a clean cloth.
Caution: To avoid damaging the battery, do not allow cleaning solution or disinfectant to
come in contact with the battery terminals.
To Next Page
Loading...
