Chapter 3: Imaging 49
Imaging
Zoom
Note: Zoom is only available during real-time imaging. You cannot zoom on a
frozen or saved image.
1 Press the Zoom key.
The image is magnified by a factor of two from the center of the
image.
Note: You can change the depth while the image is zoomed.
2 Press the Zoom key again to exit zoom.
Freeze
1 Press the Freeze key.
The cine icon and frame number are displayed in the system status
area of the screen.
2 Press the Freeze key again to return to live imaging.
The cine icon is removed from the system status area of the screen
and live imaging begins.
Cine Buffer
On a frozen image, press the Cine keys to view individual frames in the
cine buffer.
The frame number will change dynamically as the cine key is pressed.
Note: The total number of frames in the buffer is displayed in the system status
under the freeze icon.
To Next Page
Loading...
