Note
Just importing a 3D LUT file does not affect the image. Select the imported 3D LUT file using [Paint/Look] – [Base Look] – [Select] in
the camera menu.
If [Input] is not set correctly, the proper look will not be obtained.
The [Input], [Output], and [AE Level Offset] menu item settings are applied to the base look selected using [Select]. If multiple 3D LUT
files are imported, select each 3D LUT file using [Select], and configure [Input], [Output], and [AE Level Offset] individually for each file.
The configured [Input], [Output], and [AE Level Offset] settings are saved for each 3D LUT file.
The base look/LUT selection options for imported 3D LUT files are common to [SDR(BT.709)], [HDR(HLG)], and log shooting mode,
but color gamut and gamma conversion are not performed according to these modes.
3D LUT files are not deleted when [Maintenance] – [Reset] – [All Reset (except for Network Settings)] is executed in the web menu.
A
(3D LUT file attachment error) displayed in front of the [Base Look Name] display indicates that 3D LUT files cannot be attached
to clips recorded in log shooting mode. Import the 3D LUT file again.
TP1001804559
5-065-326-11(1) Copyright 2024 Sony Corporation
To Next Page
Loading...
