Related Topic
Initializing the Unit
TP1001804472
5-065-326-11(1) Copyright 2024 Sony Corporation
Item Setting Remarks
[Subnet
Mask]
255.255.255.0
[Gateway] 192.168.0.1 Configure the settings according to the network.
Wait about 10 seconds and then remove the power supply from the unit.8.
Set SETUP switch 8 to the OFF position on the connector block.9.
Reconnect the unit to the network LAN cable.10.
Connect the power supply to the unit.11.
Enter the IP address configured in step 7 in a web browser connected to the network.
The Web App screen appears.
12.
To Next Page
Loading...
