M
Marc LoweAug 27, 2025
What does alarm message Voltage Low mean on Sony PMW-EX30?
- LLacey GrayAug 27, 2025
If the DC IN voltage has become low (stage 1), check the power supply.
To Next PageTo Next PageWhat does alarm message Voltage Low mean on Sony PMW-EX30?
If the DC IN voltage has become low (stage 1), check the power supply.
What does alarm message Media(A) a) Error mean on Sony PMW-EX30 Camcorder?
If an error occurred with the memory card, if this frequently occurs, change the memory card.
What to do if Sony Camcorder recording does not start?
If the SxS memory card is full, replace it with one having sufficient space. If the SxS memory card needs restoration, restore the memory card. If the video format of the input signal does not match with the video format set on this unit, set the unit to the same video format as that of the input signal. If the SxS memory card is write-protected, release the write protection, or replace the card with a non-protected SxS memory card.
What to do if failed to acquire the power supply type for Sony Measuring Instruments?
If you fail to acquire the power supply type, turn off the power of the PMW-EX30 and repeat the procedure from the beginning.
What to do if Sony DVR says 'Media Full'?
If your Sony DVR displays 'Media Full', it means there is no space left on the SxS memory card. Replace it with another card.
What does 'Media Full' mean on my Sony DVR?
The 'Media Full' message on your Sony DVR means there is no space left on the SxS memory card. Replace it with another card.
Why is the image on the monitor screen too dark when using my Sony DVR?
If the image on the monitor screen is too dark, and you're using a video signal loop-through connection of multiple video monitors, the 75 ? termination switches for video input on monitors other than the loop-end monitor might be in the ON position. Set the 75 ? termination switches to OFF on all monitors other than the loop-end monitor.
What to do if an unexpected error occurred with Sony Measuring Instruments?
If an unexpected error occurs, turn off the power of the PMW-EX30 and repeat the procedure from the beginning.
Why won't my Sony DVR start recording when I press the REC button?
If your Sony DVR doesn't start recording, it could be due to several reasons: * The SxS memory card might be write-protected. In this case, release the write protection or use a non-protected card. * The SxS memory card might be full. Replace it with a card that has enough free space. * The SxS memory card may need restoration. * The video format of the input signal might not match the video format set on the unit. Ensure the unit is set to the same video format as the input signal.
How to fix an error in the upgrade tool for Sony Measuring Instruments?
To fix an error in the upgrade tool, reinstall a complete Version Up Tool file.
Highlights the PMW-EX30's features including HD recording, bit rates, long recording time, multiple formats, and audio.
Details operational aspects like down-conversion, various interfaces, repeat playback, and VCR-like front panel design.
Describes the 16:9 color LCD monitor and the unit's compact, vertically installable body.
Instructions for using the CD-ROM, reading manuals, and system requirements for software.
Identifies and explains the function of front panel buttons, indicators, and displays.
Details the various connectors and switches located on the rear panel of the unit.
Explains the functions of the buttons on the supplied IR remote commander.
Covers connecting power, starting the unit, and setting the internal clock and time zone.
Details adjusting the LCD display and configuring the video format for recording and output.
Explains how the unit handles timecode/user bit data and selects input/output signals.
Covers guidelines for using, inserting, formatting, and restoring SxS memory cards.
Instructions for connecting external hard disks and using media adaptors.
Details on IR remote operation, battery replacement, and vertical unit placement.
Covers settings and steps for starting and performing recording operations.
Details settings and steps for playing back recorded clips.
Explains how to stop recording and use shot marks for editing.
Covers playback modes, stopping, and using the clip operation menu.
How to play back clips using the thumbnail screen and index frames.
Selecting clips and navigating through them during playback.
Covers repeat playback, skipping clips, and cancelling playback.
Introduces clip operation menus and their basic usage.
Viewing detailed clip information and adding OK marks to clips.
Procedures for deleting clips and copying them to other memory cards.
Displaying EXPAND CLIP and SHOT MARK screens for detailed views.
Adding/deleting shot marks and changing clip index frames.
Methods for recording timecode and user bit data, including preset modes.
Details on Regen mode and external synchronization for timecode.
Steps required to synchronize the internal timecode to an external source.
How to connect video monitors to view output signals and superimposed text.
Connecting the unit to a computer for clip management and editing.
Examples of connecting devices using the HD SDI interface for dubbing and live systems.
Using the i.LINK interface for dubbing clips and connecting to editing systems.
Notes regarding computer interaction, search times, and potential signal interruptions.
How to access, switch between, and clear different unit status screens.
Details displayed on the audio and video status screens.
Information on IR remote status, battery levels, and media remaining space.
Introduction to the unit's setup menus and their hierarchical structure.
Step-by-step guide on how to navigate and set options within the menus.
Settings related to audio inputs, outputs, and levels.
Settings for video outputs, signal selection, and down-converter modes.
Adjustments for LCD display properties like color, contrast, brightness, and backlight.
Settings for timecode modes, user bits, and timecode format.
Settings for factory reset, setup data storage/recall, and time zone.
Settings for clock, language, usage hours, remote control, and region.
Configuring video formats and managing clip naming and deletion.
Procedures for copying clips between cards and formatting memory media.
General guidelines for operation, cleaning, storage, and shipping.
Information on the digital hours meter for tracking usage and maintenance.
Solutions for common problems encountered during recording and playback.
Solutions for issues with time data settings and external video monitor display.
Solutions for i.LINK device issues and common alarm messages.
Steps to take when internal error messages are detected by the self-diagnostic function.
Explanation of i.LINK features, data transfer speed, and unit operation.
Lists the unit's general technical specifications including power, dimensions, and temperature.
Details recording formats, display specifications, and input/output connectors.
Lists supplied and optional accessories, and important liability disclaimers.
Information regarding licensing terms for MPEG-2 video encoding and playback.
Licensing terms for AVC and VC-1 video standards usage.
General
