Sony STR-DA5300ES - Page 11

Remote commander
You can use the supplied remote RM-AAL008
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate (page 127).
RM-AAL008
~--- -~._.-_.-
Name
[I] AV 1/(') (on/
standby)
[2] 1/(') (on/
standby)
@jlnput
buttons
@] ZONE 2
ZONE 3
lID AMP
[§J MUSIC
[l] MOVIE
Function
Press to lurn on or olflhe audiol
video components Ihat the
remote
is assigned 10 operate
(page 127).
If you press the
11(') d1:h at Ihe
same lime. it will turn offlhe
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The funclion of the AV 1/(')
switch changes automatically
each
tin~ou press the input
button
(@J).
Press to turn the receiver on or
o IT.
If ZONE 2 or ZONE 3 is
selected, only the main receiver
is lurned on
or off with this
button. To turn
off all
components including an
amplitier in zone 2 or zone 3.
press
1/(') and AV 1/(') ([I]) at
the
samc time (SYSTEM
STANDBY).
Press one
of the buttons to
select the
component you want
to use. Press a pink-labeled
button after pressing
SHiFf
dnIJ. When you press any of the
input buttons. Ihe receiver turns
on.
The buttons are faclOry
assigned to control Sony
components (page 53). You can
program the remote
10 conlrol
non-Sony
components
following the slCps in
"Programming the remote"
(page 127).
Press to enable the zone 2
or
zone 3 operation (page 108).
Press to enable the receiver
operation (page 4 I
).
Press to select sound field
(page 67).
Press
10 select sound tield
(page 67).
•
G>
~
:i"
IC
en
-
III
...
-
(1)
c.
continued- _
11
GB