immediatc left and right
of
the seating position. the
surround effects heeome unclear unless set to
"SIDE."
Nevertheless. each listcning environment has many
variables. sueh as wall relleetions. and you may
obtain better results using
"BEHD"
if
your speakers
arc located high above the seating position. even
if
they are located to the immediate left and right.
Therefore. although
it
may result
in
a selling
contrary to the above explanation.
we
recommend
that you play back multi-channel surround encoded
software and
seleclthe
selling that provides a good
scnse
of
spaciousness and that best succeeds
in
fimning a cohesive space between the surround
sound from the surround speakers and the sound
of
the front speakers. If you are not sure which sounds
best. select
"BEHD"
and then use the speaker
distance parameter and speaker level adjustments to
obtain proper balance.
2·5
Makingsetting~v.riththe
Speaker
Pattern/menu
• SIDE/LOW
Select
if
the location
of
your surround
speakers corresponds to sections
0 and
e.
• SIDE/HIGH
Select
if
the location
of
your surround
speakers corresponds to sections
0 and
G).
•
BEHD/LOW
Select
if
the location
of
your surround
speakers corresponds to sections
0 and
e.
• BEHD/HIGH
Select
if
the location
of
your
surround
speakers corresponds to sections
0 and
G).
Tip
Surround speaker position
is
designed specifically
for implementation
of
the
Cinema
Studio
EX
modes.
For
other
sound fields. speaker position
is
not so
critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the seating position. hut presentation remains fairly
consistent even with the surround speakers
positioned at a rather wide angle. However. if the
speakers are pointing toward the listener from the
76
GB
To Next Page
Loading...
