Sony STR-DA5300ES - Page 77

Making settings with the Test
Tone menu
1 Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed
in the display window of the
receiver, follow the steps given
in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41).
2 Press +,+ repeatedly to select
"Settings," then press 8) or •.
The Settings menu list appears on the TV
screen.
3 Press +,+ repeatedly to select
"Speaker," then press
8).
4 Press +,+ repeatedly to select
"Speaker Pattern," then press
8).
Select "Speaker Pattern" according to the
speaker system which you are using. You
do not need to select the speaker pattern
after auto calibration.
5 Press +,+ repeatedly to select
the speaker pattern you want.
1 Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window
of the
receiver, follow the steps given
in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41).
2 Press +,+ repeatedly to select
"Settings," then press
(B or •.
The Settings menu list appears on the TV
screen.
3 Press +,+ repeatedly to select
"Speaker," then press 8).
4 Press +,+ repeatedly to select
"Test Tone:' then press
8).
..
»
Q.
~
:::J
o
Cll
Q.
CIl
"0
Cll
III
~
Cll
ii1
CIl
~
:i"
u::l
c
"0
continued-----
77
GB