GB
Page 34 of 58
INSTRUCTION, USE AND
MAINTENANCE MANUAL
15.4.4 ALU-S2
Valid for car
The ALU-S2 function permits balancing wheels with
light alloy rims by fitting two adhesive weights on the
outer and inner sides of the rim (the outer weight is
at 12 o’ clock). Enter the measurements (par. 15.1.2)
and proceed as described in par. 15.4.12 (the inner
weight is adhesive and at 12 o’ clock).
15.4.5 STATIC 1
Valid for car
The STATIC 1 function is a procedure that offsets wheel
vibrations using a single weight with clip on a single
plane positioned exactly at 12 o’ clock.
Enter the measurements (par. 15.1) and proceed as
described in par. 15.3.1 (only for wheel inner side)
15.4.6 STATIC 2
Valid for car/motorcycle
The STATIC 2 function is a procedure that offsets wheel
vibrations using a single adhesive weight on a single
plane positioned exactly at 12 o’ clock.
Enter the measurements (par. 15.1) and proceed as
described in par. 15.3.1 (only for wheel inner side)
15.4.7 ALU 1
Valid for car
The ALU 1 function permits balancing wheels with light
alloy rims by fitting adhesive weights on the outer sides
of the rim at 12 o’ clock.
Press "CENTRE" to confirm. Enter the measurements
and proceed as described in par. 15.4.13.
15.4.8 ALU 2
Valid for car
The ALU 2 function balances wheels with light alloy
rims by fitting adhesive weights on the outside and
inside of the rim at 12 o’ clock. The position of the
inner weight is not visible but hidden inside. Press
"CENTRE" to confirm. Enter the measurements and
execute the spin by pressing “F4” key.
1296-M010-0_P
Space s.r.l.
ER232R - ER234R - ER236R - ER238R - ER238RFM - ER248R - ERP248R
To Next Page
Loading...
