SPI Lasers redPOWER QUBE - Page 111

© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
111
o Output number 4
 Basic Function Description
o SET when there is a warning condition.
o CLEAR when there is no warning condition.
o Operational in both Local and Remote Control.
 Detailed Function Description
o This output is used to indicate when there is a Warning condition.
o This output function is SET for any warning condition. It is CLEARED when
there are no warning conditions.
o This function can be assigned to any of the seven outputs.
11.3.6 Energy Warning (Output Function ID 9) (Future Functionality):
 Default connection
o PL5 pin number 9
o Output number 5
 Basic Function Description
o SET when there is an energy warning condition.
o CLEAR when there is no energy warning condition.
o Operational in both Local and Remote Control.
 Detailed Function Description
 This output is used to indicate when there is an Energy Warning condition.
 This function can be assigned to any of the seven outputs.
11.3.7 Process Cycle Wait (Output Function ID 5):
 Default connection
o PL5 pin number 22
o Output number 6
 Basic Function Description
o SET during a Process Cycle at the end of a manual transitions step to indicate
the Process Cycle is waiting for a Step input in order to continue.
o CLEAR at any other time.
o Operational in both Local and Remote Control.
 Detailed Function Description