ST STM32H7B3I-EVAL - Limitations and Hardware Configuration for nor A19-A22 (Just for the Test); Table 48. Configuration for nor A0-A5, A10-11 Addresses, and Command

Hardware modifications are listed in Table 48 below.
Table 48. Configuration for NOR A0-A5, A10-11 addresses, and command
Pin name Signal name Setting
NOR
(1)
PF0
FMC_A0 R339 ON
OCSPI2_IO0 R98
OFF
(2)
PF1
FMC_A1 R335 ON
OCSPI2_IO1 R89
OFF
(2)
PF2
FMC_A2 R331 ON
OCSPI2_IO2 R82
OFF
(2)
PF3
FMC_A3 R74 ON
OCSPI2_IO3 R75
OFF
(2)
PG0
FMC_A10 R73 ON
OCSPI2_IO4 R76
OFF
(2)
PG1
FMC_A11 R333 ON
OCSPI2_IO5 R77
OFF
(2)
PF4
FMC_A4 R66 ON
OCSPI2_CLK R319
OFF
(2)
PF5
FMC_A5 R65 ON
OCSPI2_NCLK R318
OFF
(2)
PC7
FMC_NOR_NE1 /
DFSDM_DATIN3
Remove MB1299
JP35 [1-2]
DCMI_D1 R113
OFF
(2)
1. The default configuration is in bold.
2. Remove to avoid stub if necessary.
8.2.4 Limitations and hardware configuration for NOR A19-A22 (Just for the test)
Limitations with primary functions: camera, Wi‑Fi
®
SPI.
Limitations with secondary functions: SAI1 and TRACE
UM2662
NOR
UM2662 - Rev 1
page 53/95