Appendix E Secondary functions supported with limitations
Following secondary functions have limitations and cannot be used together with at least one of the primary
functions supported by default on the board:
• NOR
• SRAM
• OCSPI2
• SD card 2
• USB HS (ULPI)
• Audio SAI
• DFSDM (5 microphones and LED)
• STMPS2 DFSDM
• CAN FD
• Bootloader VCP UART (PA2/PA3)
• RS-232 UART
• Motor control
Figure 38. Secondary features - Use case compatibility matrix
UM2662
Secondary functions supported with limitations
UM2662 - Rev 1
page 82/95
To Next Page
Loading...
Need help?
General
