Stelpro ASMC402 - 5 SECURE THE CONTROLLER•THERMOSTAT ON THE MOUNTING PLATE

- 14 -- 14 -
5
SECURE THE CONTROLLER
•
THERMOSTAT ON THE MOUNTING PLATE
Align and secure the controller
•
thermostat on the mounting plate.
1 - Ensure the air vents in the controller
•
thermostat are clean and clear of any obstruction.
2 - Align the slot on the top of the controller
•
thermostat with the slot on the mounting plate.
3 - Then secure the controller
•
thermostat to the mounting plate making sure that the wires do not get pinched between
the unit and the mounting plate.
4 - Tighten the screw at the base of the controller
•
thermostat to secure it in place.