Stelpro ASMC402 - DEFINING THE SETPOINT TEMPERATURE OF THE CONTROLLER • THERMOSTAT

- 27 -- 27 -
DEFINING THE SETPOINT TEMPERATURE OF THE CONTROLLER
•
THERMOSTAT
Your controller
•
thermostat controls the temperature of the room in which it is installed. By default, the setpoint temperature
is dened at 70 °F.
1 - Access THERMOSTAT .
2 - Use the arrow buttons to adjust the setpoint temperature. The icon will display to conrm the selection. If the
controller
•
thermostat needs to activate the heating system to reach the setpoint temperature, the icon will indicate
the intensity at which the heating system is operating.
NOTE : Changing the setpoint temperature in the THERMOSTAT menu is considered as an exception to the group
setpoint. The change will therefore only be TEMPORARY. To make a permanent change, you must adjust the group’s
setpoint temperature.
68
AMBIENT TEMPERATURE
35%
74 7573
My Maestro
SETPOINT