Stelpro ASMC402 - OBTAINING THE REGISTRATION CODE FOR THE CONTROLLER•THERMOSTAT

- 19 -- 19 -
5 - A message will appear on the WI-FI SETUP screen informing you that the connection has been established. Tap OK to conrm
the connection. The registration code of your controller
•
thermostat will appear in the REGISTRATION screen.
6 - Enter the code in the MAESTRO app when prompted by the app’s start-up wizard.
Once your home is registered, you can start connecting your thermostats.
OBTAINING THE REGISTRATION CODE FOR THE CONTROLLER
•
THERMOSTAT
If you do not register your controller
•
thermostat in the MAESTRO app immediately after connecting to your Wi-Fi network,
you will need to follow these steps to obtain your registration code. For example, you may need to obtain the registration
code when a MAESTRO system changes owners.
1 - Access SETTINGS > WI-FI SETUP>REGISTER DEVICE. A message will display on the controller
•
thermostat REGISTRATION
screen informing you that your request for a registration code is being processed. When obtained, the registration code
will appear on the screen.
2 - Enter the code in the MAESTRO app when the start-up wizard prompts you. When your home is registered, you can start
connecting your thermostats (see “Connecting a thermostat to the controller
•
thermostat” on page 20).
Registration Code:
55a5aa
REGISTRATION
ADVICE
Download the Maestro
app and enter this code
to register your home
to your account