ii
10083002 Operating Instructions Introduction
An international standard for the safety of surgical lights established
by the IEC sets minimum and maximum levels of illumination and
maximum levels of radiant heat that can be emitted from a single
surgical luminaire. The HarmonyAIR Surgical Lighting System M
Series with Harmony LED Wall Control Unit has been designed to
comply with this international standard and to provide a wide range
of illumination levels while minimizing the potentially damaging
infrared heat in the surgical field.
The illumination level of the surgical lights can be adjusted through
several intensity settings via conveniently located controls on either
the wall-mounted control center or the lighthead handle. The
illumination level also decreases as the pattern size increases.
Maximum illuminance can exceed 12,000 fc for the smallest pattern
size of Harmony lighthead, and can be adjusted by intensity control
or pattern size control throughout the entire range specified by the
IEC.
At start up, lighthead LED modules provide illumination levels higher
than specifications. To compensate, output levels are electronically
restricted during a 5 to 25 minute startup period to remain within
specifications regardless of illumination level selected by the user.
This allows light output to be maximized at all times.
Manufactured by:
STERIS Corporation
2720 Gunter Park East
Montgomery, AL 36109 • USA
Class 1 Equipment
Ordinary Equipment (enclosed equipment without protection of
ingress of water)
Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or oxygen or nitrous oxide.
Suitable for continuous operation.
Equipment provided and incorporated by STERIS Corporation into
complete Optical Fiber Communication System (OFCS) satisfies
applicable laser safety requirements of the IEC 60825-1 (Class 1
Laser Product) and IEC 60825-2 (Hazard Level 1M for OFCS).
The base language of this document is
ENGLISH. Any translations must be made
from the base language document
STERIS Ltd.
Chancery House
190 Waterside Road
Hamilton Industrial Park
Leicester LE5 1QZ
United Kingdom