5 Operation
Display unit
Speedometer indicator
– Switch on the truck.
The speedometer indicator (1) illuminates in
the display unit.
The mode indicator (2) for miles or km illumi-
nates.
The display on the display
unit (3) indicates
the speed as soon as the tru
ck starts moving.
The operating hours are displayed there when
the truck is at a standstill.
NOTE
The speedometer can be programmed to
display speed in either km/h or mph. Please
contact the service centre about this matter.
Overheating indicator
– Overheating indicator (1) illuminates in the
display unit.
The truck has overheated.
– Truck performance is reduced.
– The yellow slow speed indicator (2) illumi-
nates in the display unit.
NOTE
If a motor or a controller becomes too hot, then
its performance will be reduced until it has
cooled to normal operating temperature.
108
172780 EN - 06/2017
To Next Page
Loading...
Need help?
General
