EasyManuals Logo

Still R 07-25 User Manual

Still R 07-25
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
6 Maintenance
Safety regulations for maintenanc
e
Label all controls to indicate a service or
repair operation is being carried out.
Protective equipment, i.e. safety footwear,
industrial goggles, protective masks,
protective gloves etc. must be worn at
all times when working with cleaning
equipment that uses compressed air or
steam.
Perform a functional check a
nd trial run after
every service.
Handling lubricants
Always handle lubricants safely and as
specified by the manufacturer.
Only store lubricants in approved containers
at specified storage locations. As they could
be flammable, do not let them come in contact
with hot objects or naked flames.
Clean the area surroundi
ng the part in ques-
tion before lubrication
, filter renewal or repairs
in the hydraulic system
.
Only use clean containers when replenishing
fuels and lubricants.
ENVIRONMENT NOTE
Lubricants and compounds used during
maintenance procedures can be harmful to the
environment. Please observe the following:
Follow the manufacturer's safety and
disposal instructions when using lubricants
and cleaning compounds
Avoid spilling lubricants. Remove any spil-
lage immediately with a suitable absorbent,
and dispose of as per local legislative requi-
rements
Always dispose of used or contaminated
lubricants as specified. Follow laws and
regulations
Dispose of used parts, empty containers,
filters etc. as per local legislative require-
ments
Set values
The device-dependen
t set values must be
observed when maki
ng repairs and when
changing hydraulic
and electrical compo-
nents. These are list
ed in the appropriate
sections.
Safety devices
After maintenanc
e and repair work, all safety
devices must be re
installed and tested for
operational relia
bility.
Workingontheele
ctrical equipment
Work may only be pe
rformedonthetruck's
electrical equip
ment when it has been de-en-
ergised. Funct
ion checks, inspections and
adjustments on e
nergised parts must only
be performed by t
rained and authorised per-
sons, taking the
necessary precautions into
account. Rings, me
tal bracelets etc. must be
156
172780 EN - 06/2017

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Still R 07-25 and is the answer not in the manual?

Still R 07-25 Specifications

General IconGeneral
BrandStill
ModelR 07-25
CategoryTractor
LanguageEnglish

Related product manuals