5 Operation
Auxiliary equipment
When the coupling pin is fully raised, the
yellow indicator light (5) lights up.
– Carefully drive the truck forwards until the
drawbar and coupling are disconnected.
NOTE
If the coupling pin is not completely raised,
the red indicator light (4) lights up. The drive
mode is then deactivated and the truck does
not drive.
NOTE
If the coupling pin becomes jammed, the
circuit breaker (2) opens and its indicator light
lights up. Investigate and clear the jam before
resetting the circuit breaker (2). If the circuit
breaker opens, then allow 30 seconds before
attempting to reset it.
Auxiliary equipment
Driver code keypad
The keypad (data logger*) comprises a
keypad with twelve keys mounted on the
dashboard and a rotary on/off switch in place
of the key switch.
The driver must input a five digit personal
identification number (PIN) in order to be able
to start the truck. This prevents unauthorised
use.
Once logged in,
the system records the type of
application an
d the operating functions.
* Variant
132
172780 EN - 06/2017
To Next Page
Loading...
Need help?
General
