Operation 5
Drive mode
1
2
Switching on the truck with th
edriver
code
The driver code* is entered u
sing a twelve-key
keypad (1) mounted on the das
hboard and a
rotary on/off switch (2).
The driver must enter a five-digit personal
identification number (PIN) to start the truck,
thereby preventing unauthorised use.
* Variant
Logging in
– Switchontherotaryswit
ch (2) by turning it
clockwise.
The display of the display unit will indicate that
a PIN is required.
– Enter the five-digit PIN using the keypad.
NOTE
NOTE: The default driver PIN is
1 2 3 4 5
.
– Press the
ENT
(2) button.
116-95
Logging out
– Press and hold the
CLR
(1) button for a
second.
– Switch off the device at the rotary switch.
NOTE
If the driver's
seat is vacated, the truck will
automatically
log off immediately and the
driver will have t
o re-enter their PIN in order to
operate the truck.
172
780 EN - 06/2017 75
To Next Page
Loading...
Need help?
General
