Operation 5
Drive mode
Extra care should be taken during reverse
travel using visual aids.
Any glass and mirrors must always be clean
and free of ice.
Switching on the truck with the key
switch
WARNING
Risk of accident as a result of improper commissi-
oning!
Before switching on the key switch, all tests prior
to commissioning must be performed without any
defects being detected.
– Carry out tests before the commissioning, see
the chapter "Checks and tasks to be carried out
prior to commissioning".
– Do not commission the truck if defects have been
identified.
– Contact your service centre.
– Insert the switch key into the key switch (1)
and switch on by turning clockwise.
All indicators on the display of the display
unit light up briefly — the truck is ready for
operation.
172
780 EN - 06/2017 73
To Next Page
Loading...
Need help?
General
