Maintenance 6
Maintenance intervals
Maintenance — 1000 hours/year
At operating hours
1000 3000 7000 9000 11000
Carried out
13000 17000 19000
Depending on the application, environmental conditions and driving style, the follo-
wing steps must be carried out at the intervals specified above, or more frequently if
required.
Before carrying out the procedures
Check for error codes using diagnostic software
Reset the service interval using diagnostic software
Chassis bodywork and fittings
Check and lubricate the automatic tow coupling (if fitted)
Check and lubricate all doors, as well as the latches and hinges of the covers
Undercarriage
Check the condition of the wheels and tyres
Check the parking brake
Lubricate the upper and lower axle stub bearings of the steering axle
Lubricate the steering linkage bearings
Check the steering linkage for wear
Check the brake fluid level. Top up if necessary
Check the brake system for damage, corrosion and leaks
Check the front and rear brake linings for wear. Replace if necessary
Check the shock absorber for damage. Replace if necessary
Electrical/Electronic
Check that the battery and battery cable are properly positioned and in good condi-
tion
Check that the electrical connections and cables are properly positioned and in good
condition
Hydraulic Installation
Check the steering fluid level. Top up if necessary
Check the steering fluid hoses for damage and leaks. Replace if necessary
General
Check labelling for completeness
Test drive the truck
172
780 EN - 06/2017 201
To Next Page
Loading...
Need help?
General
