Maintenance 6
Maintenance intervals
Maintenance - 5000 hours/every 3 years
At operating hours
Carried out
5000 10000 15000 20000
Depending on the application, environmental conditions and driving style, the fol-
lowing procedures must be carried out at the intervals specified above, or more
frequently if required.
Before carrying out the procedures
Check for error codes using diagnostic software
Reset the service interval using diagnostic software
Chassis bodywork and fittings
Check and lubricate the automatic tow coupling (if fitted)
Check and lubricate all doors, as well as the latches and hinges of the covers
Undercarriage
Check the condition and security of the wheels and tyres
Carry out a brake test on the parking brake
Lubricate the t
op and bottom steering swivel bearings
Lubricate the
steering linkage bearings
Check the steering linkage for wear
Change the brake fluid
Check the brake system for damage, corrosion and leaks
Check the front and rear brake linings for wear. Replace if necessary
Check the shock absorber for damage. Replace if necessary
Controls
Replace
the return spring on the accelerator pedal
Electrical/Electronic
Check that the battery and battery cable are properly positioned and in good condi-
tion
Check that the electrical connections and cables are properly positioned and in good
condition
Hydr
aulic Installation
Change the steering fluid and filter
Replace the steering fluid tank breather filter
Check the steering fluid hoses for damage and leaks. Replace if necessary
172
780 EN - 06/2017 205
To Next Page
Loading...
Need help?
General
