5 Operation
Checks and tasks to be carried out pr
ior to commissioning
Checks and tasks to be carried out prior to commissioning
Visual inspections
WARNING
Risk of accident due to damage or other defects on
the truck!
Damage to the truck or the attachment (variant) can
lead to unpredictable and dangerous situations.
If damage or other defects are identified on the
truck or attachment (variant) during the following
inspections, the truck must not be used until it has
been properly repaired.
– Do not remove or deactivate safety systems or
switches.
– Do not change any predefined set values.
– Do not use the truck until it has been properly
repaired.
WARNING
Risk of component damage!
A deformed or damaged battery male connector
can cause overheating and related consequential
damage.
– Check the battery male connector for damage.
– If necessary, have the battery male connector
replaced by the authorised service centre.
• Check the area under the truck for leaking
consumables.
• Attachments
(variant) must be properly
mounted and f
unction according to the
operating inst
ructions
• All decal information must be in place and
legible. Replace damaged or missing
adhesive labels in accordance with the
overview in the chapter entitled "Labelling
points"
• Any warning units (e.g. signal horn) must be
in perfect condition and function correctly
• Check the visible ar
eas of the hydraulic sys-
tem and hydraulic oi
l tank for damage and
leaks Damaged hoses mu
st be replaced by
the authorised service
centre.
• The battery must be securely locked in
place
• Check the battery male connector for dam-
age (e.g. cracks, breaks or deformation of
the housing, bent or damaged contacts). If
50 1
72780 EN - 06/2017
To Next Page
Loading...
Need help?
General
