5 Operation
Checks and tasks to be carried out pr
ior to commissioning
Before beginning your shift
Carried out
The following checks should be carried out at the beginning of every shift, before
taking the tractor into service.
Chassis, bodywork and fittings
Check the truck for any loose panels or covers.
Remove any loose items left on the truck.
Check the function of the tow coupling (if the coupling is engaged and disengaged
more than 2-3 times per shift, the coupling must be relubricated via the lubricating
nipple).
Undercarriage
Check the functio
n of the parking brake and foot brake.
Check the functi
on of the steering system.
Check the tyre pr
essure.
Check the tyre
s for damage and foreign objects.
Controls
Check the fun
ction of the traction system.
Electrica
l/Electronic
Check the battery male connector for damage (e.g. cracks, breaks or deformation
of the housing, bent or damaged contacts). If necessary, have the battery male
connector replaced by the authorised service centre.
Check the charging state of the battery.
Check the function of the display unit.
Check the function of the key switch.
Check the function of the emergency off switch.
Check the function of the parking brake.
Check the function of the seat switch.
Check the function of the battery interlock switch (platform trucks only).
Check the function of the automatic coupling (variant).
Special equipment and accessories
Fill the tank for the diesel auxiliary-heating system (variant).
52 1
72780 EN - 06/2017
To Next Page
Loading...
Need help?
General
