EasyManua.ls Logo

Still RX70-40 - Actuating the Mechanical Parking Brake

Still RX70-40
384 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Zero braking (variant)
DANGER
Risk of accident!
Trucks with zero braking (variant) are not braked
when the accelerator pedal is released.
– Bring the truck to a standstill by actuating the
brake pedal.
If your truck features the zero braking equip-
ment variant, the electric brake function is dis-
abled. Taking your foot off the accelerator
pedal does not brake the truck.
In this case, the truck can only be slowed by
applying the service brake via the brake pedal.
Actuating the mechanical parking
brake
DANGER
There is a risk of being run over if the truck rolls
away, and therefore a danger to life.
– The truck must not be parked on a slope.
– In emergencies, secure with wedges on the side
facing downhill.
– Only leave the truck when the parking brake is ap-
plied.
NOTE
Once the parking brake is released, the previ-
ously selected drive direction is retained and
is shown on the drive direction indicator.
NOTE
If you operate the accelerator pedal while the
parking brake is applied and a drive direction
is selected, the message
PARKING BRAKE
appears in the display.
Operation
4
Driving
13357348011850 EN - 08/2020 - 12

Table of Contents