Access authorisation with PIN code
(variant)
Description
Trucks equipped with the "Access authorisa-
tion with PIN code" variant are protected
against unauthorised use by a five-digit driver
PIN. Up to fifty different driver PINs can be de-
fined so that the same truck can be used by
different drivers, each with their own driver
PIN.
NOTE
The driver PINs are defined in a truck control
unit menu that can only be accessed by per-
sons with the corresponding access authorisa-
tion, e.g. fleet managers.
Once the key switch has been switched on,
the input menu for the driver PIN appears on
the display and operating unit screen. All of
the truck's functions (driving, hydraulics, addi-
tional electrical installations and the display
and operating unit displays) are blocked. The
function of the hazard warning system (var-
iant) is guaranteed. Enter the five-digit driver
PIN (possible entries from 00000 to 99999) to
enable the blocked functions. Once the correct
driver PIN has been entered, the standard dis-
plays are shown. All of the truck functions are
available.
The access authorisation can be configured in
such a way that the driver PIN has to be re-
entered each time the driver steps off the
truck, in order for the truck to be operated
again.
– Contact the authorised service centre on
this matter.
The first driver PIN is preset to "11111" at the
factory. All others are preset to "0xFFF" but
have no function as the highest valid driver
PIN is "99999". Persons with the appropriate
access authorisation, e.g. fleet managers, can
change the driver PINs in the corresponding
menu.
Operation
4
Checks and tasks before daily use
8157348011850 EN - 08/2020 - 12
To Next Page
Loading...
