EasyManua.ls Logo

Still RX70-40 - Climbing into and out of a Truck with a Raised Drivers Cab

Still RX70-40
384 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To assist with climbing into and out of the
truck, the footwell must be used as a step (5)
and the handle (1) must be used for support.
The post of the overhead guard (2) can also
be used for support.
Always climb into the truck forwards:
Grip the handle (1) with your left hand and
hold on.
Put your left foot on the step (4).
Climb into the truck with your right foot first
and sit down on the driver's seat (3).
Always climb out of the truck backwards:
Grip the handle (1) with your left hand and
hold on.
Stand up from the driver's seat and place
your left foot on the step (4).
Climb out of the truck right foot first.
Climbing into and out of a truck with
a raised driver's cab
WARNING
Risk of injury when climbing into and out of the truck
due to slipping, striking parts of the truck or becom-
ing stuck!
If the footwell cover is very dirty or smeared with oil,
there is a risk of slipping. There is a risk of hitting
your head on the overhead guard post or of your
clothes becoming stuck when climbing out of the
truck.
Ensure that the footwell cover is not slippery.
Do not jump into or out of the truck.
Ensure that you have a secure grip on the truck.
WARNING
Risk of injury when jumping out of the truck!
If your clothing or jewellery (e.g. watch, ring etc.) be-
comes stuck on a component while you are jumping
out of the truck, this can lead to serious injuries (e.g.
from falling, loss of fingers etc.). It is forbidden to
jump out of the truck.
Do not jump out of the truck.
Do not wear jewellery at work.
Do not wear loose-fitting workwear.
7331_003-005
5 4
1
23
Operation
4
Checks and tasks before daily use
70 57348011850 EN - 08/2020 - 12

Table of Contents

Other manuals for Still RX70-40

Related product manuals