EasyManua.ls Logo

Still RX70-40 - Setting down Loads

Still RX70-40
384 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Never drive with a load protruding to the
side (e.g. with the sideshift)!
Setting down loads
DANGER
Risk of accident due to changed moment of tilt!
The load centre of gravity and the moment of tilt
move due to tilting the lift mast forwards with a raised
load or due to the load slipping. The truck may tip
forwards.
Only tilt the lift mast forwards with a raised lifting
accessory when it is directly above the stack.
When the lift mast is tilted forwards, take particu-
lar care to ensure that the truck does not tip for-
wards and that the load does not slip.
WARNING
Risk of accident from a falling load!
If the fork or the load remains suspended during low-
ering, the load may fall.
When removing from stock, move the truck far
enough back so that the load and the fork can be
lowered freely.
6210_800-014
Operation
4
Handling loads
17957348011850 EN - 08/2020 - 12

Table of Contents

Other manuals for Still RX70-40

Related product manuals