EasyManua.ls Logo

Still RX70-40 - Driver Restraint Systems (Variants); Ceiling Sensor (Variant)

Still RX70-40
384 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The forward travel indicator (2) illuminates.
Cruise control is switched off. The
symbol
is displayed.
NOTE
If the truck is configured with automatic func-
tions that reduce the driving speed to 6 km/h
or less in certain situations, then these func-
tions will also switch the cruise control off au-
tomatically.
Driver restraint systems (variants)
Different driver restraint systems are available
as variants for this truck. The description and
operation for these systems can be found in
the separate "Driver restraint systems" operat-
ing instructions.
Ceiling sensor (variant)
Description
The ceiling sensor (1) on the overhead guard
is an assistance system that automatically re-
duces the driving speed of the truck within
halls. However, this assistance system does
not release the driver from the responsibility of
observing the speed limits on company prem-
ises.
Depending on the system setting, the ceiling
sensor can detect overhead structures above
the truck at a height of 2 m to 24 m above the
sensor.
Operating the ceiling sensor system
The drivers are to be instructed on the use of
the ceiling sensor system by the operating
company.
8
9
0
6
7
4
3
5
2
7312_003-150
1
Operation
4
Auxiliary equipment
224 57348011850 EN - 08/2020 - 12

Table of Contents