Component Course of action
Underside
Check the area under the forklift truck for leaking
consumables.
Overhead guard, guard grille (variant)
Perform a visual inspection for integrity.
Check for secure mounting.
Steps Make sure they are clean (free of ice, not slippery).
Panes of glass (variant)
Perform a visual inspection for integrity.
Make sure they are clean (also free of ice).
Handholds Check for secure mounting.
Maintenance lids Check the close function and close the lids.
Fuel system, fuel tank
Perform a visual inspection for damage and leak-
ages.
Have damaged components replaced only by the
authorised service centre.
Battery
Perform a visual inspection for integrity and defor-
mation.
Bonnet and side flap
Perform a visual inspection for integrity and defor-
mation.
Check that the interlock is in good condition and is
working correctly.
Check the close function and close the cover.
Coupling pin, tow coupling (variant)
Perform a visual inspection for deformation and
wear (for example, bent, torn, broken).
Check the securing bush in the counterweight for
integrity and that it is working correctly.
Check that the linchpin is present and working cor-
rectly (chain, rope, split pin).
Labelling, adhesive label
Check for presence, integrity and legibility.
Replace damaged or missing adhesive labels in ac-
cordance with the section entitled "Labelling points".
Driver's seat, seat belt Check the integrity and function.
Lighting, warning units Check the integrity and function.
Antistatic belt
Perform a visual inspection for integrity.
Ensure cleanliness.
The antistatic belt must be long enough to touch the
ground adequately.
Lift and tilt cylinders, tank, valve block, ho-
ses, pipes, connections
Perform a visual inspection for damage and leak-
ages.
Check the area under the truck for leaking consum-
ables.
Have damaged components replaced only by the
authorised service centre.
Operation
4
Checks and tasks before daily use
6757348011850 EN - 08/2020 - 12
To Next Page
Loading...
