Stratasys Objet350 - Page 169

Objet350 User Guide 6 Operating and Maintaining the Objet350 3DPrinter
DOC-17001 Rev.G 6-38
4. Removethescrewsthatsecuretherollerscraperassembly.
Figure6-43Removingtherollerscraperscrews
5. Removethescraperbladeanddiscardit.
Figure6-44Removingtheoldrollerscraperblade
6. Placethenewscraperbladeontothepinsintheholder,asshown.
Figure6-45Insertingthenewrollerscraperblade