Stratasys Objet350 - For more Information

Objet350 User Guide 1 About This Guide
DOC-17001 Rev.G 1-2
Using This Guide
Thisuserguideprovidesinstructionsforinstalling,operatingandmaintaining
Objet3503Dprintingsystems.Itexplainshowtousefeatures,andprovides
practicalexamplestoguideyouasyouusethesystem.
ThetextandfiguresinthisguidearebasedontheObjet3503Dprinter,
printersoftwareversion38.2andObjetStudiosoftwareversion9.2.
Thisguideassumesthat—
•allthehardware,software,andnetworkcomponentsofyourObjet350
systemareinstalled,configured,andoperatingcorrectly.
•theoperatorhasaworkingknowledgeoftheWindows
®
PCplatform.
For More Information
Visithttp://www.stratasys.com/todownloadadditionaldocumentsforthis
printer,includingdocumentsinotherlanguages.Alsoavailableonthissite:
detailsaboutconsumablesandsupportcontacts.
Ifyouhaveanyquestionsorcommentsaboutthewayinformationis
presentedinthisdocument,orifyouhaveanysuggestionsforfutureeditions,
pleasesendamessagetoc-support@stratasys.com.