Stratasys Objet350 - Page 214

Objet350 User Guide 6 Operating and Maintaining the Objet350 3DPrinter
DOC-17001 Rev.G 6-83
Test Name Description Possible Reason for Failure
Head/BlockHeaters Teststheheatersintheprintheads
andintheprint-blockbody.
Faultyheatersorthermistors.
UVLamps TestseachUVlampattheHigh
Qualitypowerlevel.
FaultyUVlamp.
FaultyUVpowersupply.
DisconnectedUVcable.
AxesLimit Teststhehardwareandsoftware
limitsofallaxes.
Faultyhardwaresensors.
WrongMax Positionparameter.
ParameterSanity
Check
Comparesthevaluesofallprinter
parameters(incfgfiles)tothe
requiredvalues.
Oneormoreoftheprinterparameters
isnotwithintherequiredrange.
DetailsappearintheBITreport.
Vacuum Teststhevacuumlevelintheprint
block.
• Faultyvacuumsensor.
• Vacuumleakage.
• Wrongparameters.