Design and function
110
Verti-Mix SF / Verti-Mix Double SF Version 06.12
5.14 Operating modes
The 3 possible operating modes "Charging", "Discharging" and
"Transport" are selected via the release switch "Charging" and the
position of the manual throttle lever.
After selection of the required operating mode, the machine functions
not needed are locked, thus avoiding operating errors.
5.14.1 "Transport" mode
For carrying out transport journeys, select the operating mode
"Transport".
"Transport" mode is activated after the release switch
"Charging" has been turned off and the manual throttle lever has
been moved to its idle position.
Depending on the machine’s equipment, the machine can be
moved via the pedal at a travelling speed between 0 - 25 km/h
or 0 - 40 km/h in a fuel-saving way in "Transport" mode.
The maximum travelling speed depends on the required
machine power during the respective transport journey.
With the "Four-wheel steering" function (optional extra) switched
on, the maximum travelling speed is automatically limited to
16 km/h.
1. Switch the release button "Charging" off.
2. Set the manual throttle lever to idle
position.
The terminal displays the set engine speed.
The terminal displays the basic
configuration of the "Transport" mode with
the "Rabbit" symbol
.
The machine can be moved at a travelling
speed between 0 – 25 km/h or 0 – 40 km/h.
Fig. 67
Fig. 68
To Next Page
Loading...
