Strautmann Verti-Mix SF - Settings of Transport Mode

Design and function
84
Verti-Mix SF / Verti-Mix Double SF Version 06.12
(19) Mixing auger(s) – ON
(20) Mixing auger(s) – Quick motion mode
(21) Diesel engine – Speed 1
(22) Diesel engine – Speed 2
(23) Pick-up milling cutter – Position 1 (no
function)
(24) Pick-up milling cutter – Position 2 (no
function)
(25) Switching function 1 – ON
(possibly movable crossover conveyor or
folding side discharge conveyor, optional
extras)
(26) Switching function 1 – OFF
(possibly movable crossover conveyor or
folding side discharge conveyor, optional
extras)
(27) Switching function 2 – ON
(28) Switching function 2 – OFF
(29) Automatic procedure 1 (no function)
(30) Automatic procedure 2 (no function)
(31) Automatic procedure 3 (no function)
(32) Change of direction of motion
(33) Set value of factory setting (no function)
(34) Cancel entry
1. Touch the respective symbol to select the
desired function.
5.7.7.1 Settings of "Transport" mode
0
Maximum speed - Front axle steering
Defines the possible maximum speed in "Transport" mode in percent.
1
Maximum speed - Four-wheel steering
Defines the possible maximum speed for the "Four-wheel steering" function in
percent.
2
Ramp time - Accelerate
Defines how fast the vehicle accelerates.
3
Ramp time - Reduce
Defines how fast the vehicle reduces its speed after the pedal has been released.
4
Pedal curve
Defines the pedal's sensitivity.