Strautmann Verti-Mix SF - Brake System; Axles

Safety instructions
Verti-Mix SF / Verti-Mix Double SF Version 06.12
37
3.4.4 Brake system
 Immediately stop the machine in case of failure of the brake
system. Have the failure promptly remedied!
 Only authorized workshops or qualified personnel are allowed to
carry out adjustment and repair work on the brake system!
 Have the brake system regularly and thoroughly checked!
In order to maintain the operational safety, the wheel brakes
must always be properly adjusted.
 Before carrying out any work on the brake system:
 safely park the machine and secure it against accidental
rolling (chocks),
 secure a lifted machine against accidental lowering!
 Especially beware when carrying out welding and drilling work
and work involving open fire in the vicinity of brake lines!
 As a basic principle, test the brakes after any adjusting and
maintenance work on the brake system!
3.4.5 Axles
As a basic principle, never overload the axles. Overloading of axles
reduces the service life of the axle bearings and causes damage to
the axles.
Therefore avoid:
 overloading of the machine,
 bumping into curbs,
 exceeding the speed limit,
 mounting wheels of wrong inserting depth,
 mounting inappropriate wheels and tyres.